164-01010 Pentair OptiPure OP70/10 RO Reverse Osmosis System

OptiPure

$1,588.00
SKU:
164-01010
Shipping:
Calculated at Checkout
Adding to cart… The item has been added
Superwater.com offers Discounted (**Class E) FedEx & UPS Ground Shipping on every # 164-01010 Pentair OptiPure OP70/10 RO Reverse Osmosis System order.

***SPEND OVER $300, USE THE COUPON CODE ( superwater20 ) ON CHECKOUT FOR AN ADDITIONAL $20 OFF YOUR ENTIRE ORDER w/ NO TAX (**Except Florida).

***WE ARE AN AUTHORIZED PENTAIR EVERPURE / OPTIPURE FOODSERVICE AND COMMERCIAL DEALER W/ OVER 25+ YEARS EXPERIENCE. Please call us with any questions you may have.

The Pentair OptiPure Part # 164-01010 OP7010 utilizes Reverse Osmosis (RO) to remove >97% of the Total Dissolved Solids (TDS) from water.

Then, a balance of minerals is dissolved into the RO water to provide optimized water with desirable TDS for recommended applications. The system operates at line pressure and can produce up to 70-gallons per day of optimal quality water.

The compact OP70 processor can be wall-mounted or installed under the counter and includes integrated pre-filtration with particulate and chlorine reduction.

System includes a built-in full system bypass valve. System also includes a 10-gallon hydropneumatic storage tank and hose, tubing and fittings required for installation.

The 164 01010 Pentair OptiPure OP70 /10 RO Reverse Osmosis System:

- Significantly reduces scale and corrosion problems related to high TDS, water hardness and chlorides.

- Ideal for combi and steam oven applications where TDS, hardness and chloride reduction are necessary to meet manufacturer’s warranty requirements.

- Integrated mineral-addition cartridge provides TDS needed for conductivity sensors and optimal mineral content for steam equipment applications.

- High capacity pre-filter takes out sediment and chlorine and protects the RO membrane.

- Sealed hydropneumatic storage tank provides needed capacity and delivers pressurized water to downstream equipment.

- Integrated system bypass valve eliminates costly service interruptions and down-time.

- Compact, modular design utilizes installation under counters and in tight spaces.

- Non-electric design operates on available water pressure.

- Simple, easy-to-install and service design.

The 164-01010 Pentair OptiPure OP70 /10 RO Reverse Osmosis System Applications:

- COMBI OVENS

- STEAM EQUIPMENT

- PROOFERS & HUMIDIFIERS

The 164-01010 Pentair OptiPure OP70 /10 RO Reverse Osmosis System Specifications:

- Dimensions - Processor 14.4”h x 12.4”w x 6.9”d
- Dimensions - Tank 23.3”h x 15.6”dia.
- Connection - Feedwater 3/8” Push Fit Tubing
- Operating Pressure Range 60 - 85 psi (3.5 - 5.9 bar)
- Inlet Water Temperature Range 40˚ - 100˚F (4˚ - 38˚C)
- Shipping Weight 30 lbs.
- Drain Connection 2.0 gpm
- Minimum Flow Performance
- Typical TDS Rejection >97%
- Product Water Production (at 77oF, 60 psi Net Operating Pressure) **Production rate is strictly dependent on feed water temperature and pressure. 70.0 gals./day 2.9 gals./hr
- Storage Tank Capacity 10 gals.

Science has proven water has the potential to transform your world view. Crystals formed in frozen water reveal changes when specific, concentrated thoughts are directed toward them. Water that has been exposed to loving words shows brilliant, complex, and colorful snowflake patterns. The implications of this research create a new awareness of how we can positively impact the earth and our personal health.- Dr. Masaru Emoto The Hidden Messages in Water.