Superwater.com offers Discounted (**Class B) FedEX and UPS Ground Shipping on every # 255669-43 (**20 Pack ) Pentek Single ELPC-20 Electroplating Cartridge 20" Filter Order.
***SPEND OVER $300, USE THE COUPON CODE ( superwater20 ) ON CHECKOUT FOR AN ADDITIONAL $20 OFF YOUR ENTIRE ORDER w/ NO TAX (**Except Florida).
***WE ARE AN AUTHORIZED PENTEK, PENTAIR, EVERPURE COMMERCIAL & RESIDENTIAL DEALER INC w/ OVER 2%+ YEARS EXPERIENCE. Please call us with any questions you may have.
The Pentek ELPC-20 Filter Cartridge Replacement is a 20 inch electroplating filter for use in various electroplating applications and electroplating solutions. The Pentek 255669-43 is standard diameter filter (2 7/8" diameter). The Pentek ELPC-20 uses Fibredyne technology which is the best filter technology available for use in a wide range of electroplating applications and will help prevent plating porosity and brittleness.
This advanced Pentek electroplating filter replacement cartridge is specifically made to reduce sulfur, chlorine, and other chemicals in water that may cause problems during the electroplating process. It also removes or reduces sediment, dirt, rust, and other impurities.
Pentek ELPC-20 Filter Replacement Specifications:
- Connection: Drop in
- Temp. Range: 40 - 180 F
- Initial Pressure Drop: 3.4 PSI
- Micron Rating: 7 micron nominal
- Dimensions: 20" length x 2 7/8" diameter
- Filter Media: Granular activated carbon (GAC)
- Reduces: Sulfur, chlorine, sediment, dirt, and other chemicals and impurities
- Gallons Per Minute: About 2 GPM flow rate depending on specific filter system
- Filter Life: About 3-6 months depending on usage and water quality; filter should be replaced when a reduction in flow rate is noticed
- NOTE: this cartridge should be flushed for a few minutes prior to first use in order to remove excess carbon fines
The manufacturing of this filter ensures that there is no bleeding of carbon fines into the plating bath and that sulfur is not leached into the plating bath. It is resistant to chemical breakdown up to 180 degrees Fahrenheit. The depth filtration of this cellulose free electroplating filter has a high dirt holding capacity and minimum pressure drop.
This Pentek ELPC20 electroplating filter is also known by Pentek part number # 25566943.
Science has proven water has the potential to transform your world view. Crystals formed in frozen water reveal changes when specific, concentrated thoughts are directed toward them. Water that has been exposed to loving words shows brilliant, complex, and colorful snowflake patterns. The implications of this research create a new awareness of how we can positively impact the earth and our personal health.- Dr. Masaru Emoto The Hidden Messages in Water.
***SPEND OVER $300, USE THE COUPON CODE ( superwater20 ) ON CHECKOUT FOR AN ADDITIONAL $20 OFF YOUR ENTIRE ORDER w/ NO TAX (**Except Florida).
***WE ARE AN AUTHORIZED PENTEK, PENTAIR, EVERPURE COMMERCIAL & RESIDENTIAL DEALER INC w/ OVER 2%+ YEARS EXPERIENCE. Please call us with any questions you may have.
The Pentek ELPC-20 Filter Cartridge Replacement is a 20 inch electroplating filter for use in various electroplating applications and electroplating solutions. The Pentek 255669-43 is standard diameter filter (2 7/8" diameter). The Pentek ELPC-20 uses Fibredyne technology which is the best filter technology available for use in a wide range of electroplating applications and will help prevent plating porosity and brittleness.
This advanced Pentek electroplating filter replacement cartridge is specifically made to reduce sulfur, chlorine, and other chemicals in water that may cause problems during the electroplating process. It also removes or reduces sediment, dirt, rust, and other impurities.
Pentek ELPC-20 Filter Replacement Specifications:
- Connection: Drop in
- Temp. Range: 40 - 180 F
- Initial Pressure Drop: 3.4 PSI
- Micron Rating: 7 micron nominal
- Dimensions: 20" length x 2 7/8" diameter
- Filter Media: Granular activated carbon (GAC)
- Reduces: Sulfur, chlorine, sediment, dirt, and other chemicals and impurities
- Gallons Per Minute: About 2 GPM flow rate depending on specific filter system
- Filter Life: About 3-6 months depending on usage and water quality; filter should be replaced when a reduction in flow rate is noticed
- NOTE: this cartridge should be flushed for a few minutes prior to first use in order to remove excess carbon fines
The manufacturing of this filter ensures that there is no bleeding of carbon fines into the plating bath and that sulfur is not leached into the plating bath. It is resistant to chemical breakdown up to 180 degrees Fahrenheit. The depth filtration of this cellulose free electroplating filter has a high dirt holding capacity and minimum pressure drop.
This Pentek ELPC20 electroplating filter is also known by Pentek part number # 25566943.
Science has proven water has the potential to transform your world view. Crystals formed in frozen water reveal changes when specific, concentrated thoughts are directed toward them. Water that has been exposed to loving words shows brilliant, complex, and colorful snowflake patterns. The implications of this research create a new awareness of how we can positively impact the earth and our personal health.- Dr. Masaru Emoto The Hidden Messages in Water.
