How to Install an Under-Sink Water Filtration System in 7 Simple Steps
Installing a water filter might sound like a job for a professional plumber, but with the right guidance, it is a project any homeowner can tackle. At Superior Water Systems, we’ve spent over 30 years helping families transform their tap water. Whether you are tired of the taste of city water or want to ensure your family is drinking the purest water possible, we are here to help.
How do you install an under-sink water filter?
To perform an Under-Sink Water Filtration System Installation, you must first shut off the cold water supply and mount the filter head to the cabinet wall. Next, install the dedicated Faucet (if included) and connect the system to your cold water line using a T-adapter. Connect the plastic tubing from the source to the filter and then to the faucet. Finally, insert the filter cartridge, turn the water back on, and flush the system for several minutes to remove carbon fines.
Why Choose Superior Water Systems?
Before we dive into the steps, it’s important to know who is guiding you. Superior Water Systems (superwater.com) began in 1995. Since our incorporation in 1996, we have grown from a local Florida "brick and mortar" business into a world-class authorized dealer for brands like Everpure, Pentek, Pentair, and 3M.
Because we maintain over 500 local accounts in Boca Raton and across Florida, we don’t just sell products, we understand how they work in real-world applications. When you buy from us, you’re getting 100% genuine products backed by over 24 years of technical experience.
Step-by-Step Guide to Under-Sink Water Filtration System Installation
If you have chosen the Best Under-Sink Water Filtration System for Home use, perhaps a high-end Everpure or Pentek system from our catalog, follow these seven steps to get it running.
1. Preparation and Tools
Gather your tools before you start. You will typically need an adjustable wrench, a screwdriver, and a bucket to catch any drips. Clear out the area under your kitchen sink to give yourself plenty of room to work.
2. Shut Off the Water Supply
Locate the cold water shut-off valve under your sink. Turn it clockwise until it stops. Open the kitchen faucet to bleed off any remaining pressure. This is a great time to check if your existing plumbing needs any maintenance.
3. Install the Filter Faucet
Most Under-Kitchen-Sink Water Filter Systems come with a dedicated lead-free faucet. If your sink has a pre-drilled hole (often used for a soap dispenser), use that. If not, you may need to drill a hole through the sink or countertop. Slide the faucet through the hole and secure it from underneath using the provided nut and washers.
4. Mount the Filter Head
Choose a spot on the side wall of your cabinet that allows enough room (usually 2-3 inches) below the filter for future changes. Screw the mounting bracket into the cabinet wall. Ensure it is sturdy enough to hold the weight of the filter when it is full of water.
5. Connect to the Cold Water Line
Disconnect the flexible hose that goes to your main kitchen faucet from the shut-off valve. Attach a T-adapter (usually included with your kit) to the shut-off valve. Reconnect your main faucet hose to one side of the T-adapter and the filter tubing to the other.
6. Connect the Tubing
Measure and cut the plastic tubing provided. You will run one line from the T-adapter to the "In" port on the filter head, and another line from the "Out" port to the base of your new filter faucet. Most modern systems use "push-to-connect" fittings, simply push the tube in until it seats firmly.
7. Install the Cartridge and Flush
Take your under-sink water filter replacement cartridge and insert it into the head. Usually, this involves a simple "twist and lock" motion. Turn the water supply back on slowly and check for leaks. Open the filter faucet and let the water run for 5-10 minutes. This flushes out any trapped air or carbon fines from the new cartridge.
Maintaining Your System
To keep your water tasting its best, remember that the cartridge isn't permanent. Depending on your water usage, you will need to swap it out every 6 to 12 months. At Superior Water Systems, we pride ourselves on being an authorized distributor, ensuring that every replacement you buy from us is a genuine, high-quality part designed for your specific system.
Experience the Superior Difference
At Superior Water Systems, we respect our customers and care about earning your business properly. If you aren't 100% satisfied with your purchase, we offer a flexible return policy because we want you to have the perfect solution for your home.
Conclusion
Upgrading to an under-sink filtration system is an investment in your home’s health and convenience. At Superior Water Systems, we leverage over 30 years of hands-on experience to ensure you receive the absolute best in water quality.
Whether you are performing a new installation or simply replacing a cartridge, our status as an authorized dealer for brands like Everpure and Pentair guarantees genuine parts and expert technical support. Don’t settle for average tap water. Visit our website today to find the perfect system for your home. We’re here to help you drink better.